 Feature
|
1. Clamp unit
|
The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
|
Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
|
End point positioning controlled by high precision transducers.
|
Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
|
Tie bars with unload slot marches spring nut can be constant of using for long time.
|
¡¤closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
|
five points holding pressure to clamping processes computer-optimized.
|
2. Injection unit
|
Twin opposed cylinders ensure parallel injection movement.
|
Screw cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
|
3. Hydraulic system
|
Adjustable backpressure and zero backpressure may be option.
|
Integrations valve board is response soon and high precision.
|
Hydraulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
|
4. Electrical control unit
|
a) There is 3-manners of manual, semi-auto, automatic in the menu.
|
b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
|
c) The menu of special computer imported has two color: one is black and write, other color.
|
PRODUCTS LIST 
