|
Item NO.: IMM2300
Description: Injection Moulding Machine
Details:
| Specification: |
 Feature
|
1. Clamp unit
|
”¤The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
|
”¤Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
|
”¤End point positioning controlled by high precision transducers.
|
”¤Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
|
”¤Tie bars with unload slot marches spring nut can be constant of using for long time.
|
”¤closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
|
”¤five points holding pressure to clamping processes computer-optimized.
|
2. Injection unit
|
”ł Twin opposed cylinders ensure parallel injection movement.
|
”ł Screw cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
|
3. Hydraulic system
|
”ł Adjustable backpressure and zero backpressure may be option.
|
”ł Integrations valve board is response soon and high precision.
|
”ł Hydraulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
|
4. Electrical control unit
|
a) There is 3-manners of manual, semi-auto, automatic in the menu.
|
b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
|
c) The menu of special computer imported has two color: one is black and write, other color.
| |
 |
|
SPECIFICATION |
|
|
A |
B |
C |
D |
|
INJECTION UNIT |
|
|
SCREW DIAMETER |
mm |
50 |
55 |
60 |
|
|
SCREW L/D RATIO |
L/D |
23 |
21 |
19.2 |
|
|
SHOT VOLUME(THEORETICAL) |
cm3 |
455 |
550 |
655 |
|
|
INJECTION WEIGHT(PS) |
g |
416 |
503 |
600 |
|
|
INJECTION RATE |
g/s |
187 |
227 |
270 |
|
|
PLASTICIZING CAPACITY |
g/s |
30 |
38 |
43 |
|
|
INJECTION PRESSURE |
MPa |
205 |
169 |
142 |
|
|
SCREW SPEED |
rpm |
180 |
|
CLAMPING UNIT |
|
|
CLAMP FORCE |
kN |
2300 |
|
OPEN STROKE |
mm |
525 |
|
SPACE BETWEEN TIE BARS(W*H) |
mm |
538*520 |
|
MAX.MOULD HEIGHT |
mm |
550 |
|
MIN.MOULD HEIGHT |
mm |
200 |
|
EJECTOR STROKE |
mm |
130 |
|
EJECTOR FORCE |
kN |
70 |
|
OTHER |
|
|
MAX.PUMP PRESSURE |
MPa |
16 |
|
PUMP MOTOR POWER |
kW |
22 |
|
HEATING POWER |
kW |
14.85 |
|
MACHINE DIMENSION(L*W*H) |
m |
5.95*1.60*2.10 |
|
OILTANK CUBAGE |
L |
400 |
|
MACHINE WEIGHT |
t |
8 | | |
|
|
|
|
