|
Item NO.: IMM7300
Description: Injection Moulding Machine
Details:
| Specification: |
 Feature
|
1. Clamp unit
|
”¤The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
|
”¤Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
|
”¤End point positioning controlled by high precision transducers.
|
”¤Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
|
”¤Tie bars with unload slot marches spring nut can be constant of using for long time.
|
”¤closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
|
”¤five points holding pressure to clamping processes computer-optimized.
|
2. Injection unit
|
”ł Twin opposed cylinders ensure parallel injection movement.
|
”ł Screw cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
|
3. Hydraulic system
|
”ł Adjustable backpressure and zero backpressure may be option.
|
”ł Integrations valve board is response soon and high precision.
|
”ł Hydraulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
|
4. Electrical control unit
|
a) There is 3-manners of manual, semi-auto, automatic in the menu.
|
b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
|
c) The menu of special computer imported has two color: one is black and write, other color.
| |
 |
| SPECIFICATION |
|
| A |
B |
C |
D |
| INJECTION UNIT |
|
| SCREW DIAMETER |
mm |
90 |
95 |
105 |
110 |
| SCREW L/D RATIO |
L/D |
23.2 |
22 |
19.9 |
19 |
| SHOT VOLUME(THEORETICAL) |
cm3 |
2861 |
3188 |
3894 |
4273 |
| INJECTION WEIGHT(PS) |
g |
2603 |
2901 |
3543 |
3888 |
| INJECTION RATE |
g/s |
574 |
640 |
781 |
858 |
| PLASTICIZING CAPACITY |
g/s |
76 |
85 |
98 |
109 |
| INJECTION PRESSURE |
MPa |
195 |
175 |
143 |
130 |
| SCREW SPEED |
rpm |
110 |
| CLAMPING UNIT |
|
| CLAMP FORCE |
kN |
7300 |
| OPEN STROKE |
mm |
950 |
| SPACE BETWEEN TIE BARS(W*H) |
mm |
950*950 |
| MAX.MOULD HEIGHT |
mm |
960 |
| MIN.MOULD HEIGHT |
mm |
400 |
| EJECTOR STROKE |
mm |
280 |
| EJECTOR FORCE |
kN |
210 |
| OTHER |
|
| MAX.PUMP PRESSURE |
MPa |
16 |
| PUMP MOTOR POWER |
kW |
37+37 |
| HEATING POWER |
kW |
46.45 |
| MACHINE DIMENSION(L*W*H) |
m |
11.00*2.50*2.80 |
| OILTANK CUBAGE |
L |
1200 |
| MACHINE WEIGHT |
t |
41.5 | | |
|
|
|
|
